BMW INPA / Ediabas K+DCAN USB Interface

Works with INPA, SSS, Progman and others.
(All functions as in Omitec Interface)

The smallest, best looking & highest quality of it's kind.
 

Functions:
- Read & erase errors
- Adaptations
- Coding
- And others...
 

Models that require D-CAN:
- E60, E61 after 3/2007
- E83 after 9/2006
- E81, E87 after 3/2007
- E90, E91, E92, E93 after 3/2007
- E70 (New X5)
- R56 (New Mini)
- And others...
 

Features:
- Connects to USB (built in 1,5m long USB Cable, creates virtual comport)
- Double K-Line support (See Screenshot)
- High Speed D-CAN and PT-CAN support (500 kbit/s) (See Screenshot)
- Low Speed PT-CAN support (100 kbit/s)
- Battery voltage detection by control line (See Screenshot)
- Ignition voltage detection by control line
 

Package contains:
INPA / Ediabas K+DCAN USB Interface - 1 

F.A.Q:
Q: I have an older BMW with OBD2 Connector (16 pin) which uses K-Line - will this Interface work?
A: Yes this interface will also work on older OBD2 BMW's using K-Line, however there is a cheaper option for you - please check our other auctions.

Q: I have an rather new BMW with OBD2 Connector which uses D-CAN can't I use a simple (cheap) Interface?
A: No, you need a interface which supports D-CAN such as the one offered in this auction, there is no K-Line available in the new cars anymore so you will not be able to communicate with the car using a K-Line only based Interface.

Q: How does this Interface work?
A: It's setup as a STD:OBD2 Interface and translates all commands / traffic to and from the D-CAN Bus.

Q: I have seen other auctions from other vendors for a higher / lower price, what's the difference ?
A: Usually the price and the quality - Since our Interfaces are assembled and tested to the highest quality standards, It's up to you (the customer) to compare price, product and terms and make your decision according to that.

Q: I have an very old BMW that have an 20pin OBD1 connector under the hood, can I use this interface?
A: Basically - yes, however you would need an OBD2 16pin female to OBD1 20pin adaptercable and certain cars would even require a real RS232 ADS Interface to gain access to all modules - given all that we do NOT recommend using this interface on OBD1 20 pin vehicles.